New Products

Akermann Electronic BG - The Key Company for your Success
General Condition of Sale              |             Usage and non re-export declaration            |           Site map
1991-2017 Akermann Electronic BG Ltd. All rights reserved.
MaxLife fast-charge Li-Ion technology

Battery management chipsets with TIs patented new MaxLife fast-charge technology, which allows consumers to charge single-cell Li-Ion batteries faster and experience longer battery life. The bq27530 and bq27531 fuel gauge circuits, coupled with TIs bq2416x and bq2419x chargers, optimize battery performance using the highest possible charge rates with minimal battery degradation.

TPS54116-Q1 key features and benefits
    Integrated low- and high-side power MOSFETs and a 1-A sink/source DDR VTT termination regulator support 4 A of continuous output current.
    Current-mode control with external clock-synchronization capability keeps the frequency fixed across the entire output load range.
    Automotive Electronics Council (AEC)-Q100 qualified with 4-kV electrostatic discharge (ESD) protection for automotive applications.

10-A SIMPLE SWITCHER power modules (LMZ31710/07/04)

The SIMPLE SWITCHER 10-A LMZ31710, 7-A LMZ31707 and 4-A LMZ31704 integrated power solutions combine a DC/DC converter with power MOSFETs, a shielded inductor and passives into a low-profile QFN package, providing a complete power management solution with as few as three external components.

    The DS125BR800 is an extremely low-power high-performance multi-protocol repeater/redriver designed to support eight channels of PCIe Gen-3/2/1, 10G-KR, and other high-speed interface serial protocols up to 12.5 Gbps. The receivers continuous time linear equalizer (CTLE) provides a boost of up to +30 dB at 6.25 GHz (12.5 Gbps) in each of its eight channels and is capable of opening an input eye that is completely closed due to inter symbol interference (ISI) induced by interconnect medium such as 30in+ backplane traces or 8m+ copper cables, hence enabling host controllers to ensure an error free end-to-end link.
    The HD3SS6126 is a high speed passive switch that is designed for USB 3.0 applications to route signals from a source to two destination or vice-versa. It can also be used for DisplayPort, PCIe, SATA, SAS, and XAUI applications.
    The InstaSPIN-FOC enabled C2000 Piccolo LaunchPad is an inexpensive evaluation platform designed to help you leap right into the world of sensorless motor control using the InstaSPIN-FOC solution. The LaunchPad is based on the Piccolo TMS320F28027F with unique features such as 64KB of on board flash, 8 PWM channels, eCAP, 12bit ADC, I2C, SPI, UART, and InstaSPIN-FOC in on-chip execute only ROM memory. The LaunchPad includes many board hardware features such as an integrated isolated XDS100v2 JTAG emulator for easy programming and debugging, 40 PCB pins for easy access to the pins of the F28027F processor, reset button and programmable button, etc. Works with various BoosterPacks.

    The LMR22007 is a switching regulator designed for the high-efficiency requirement of applications with stand-by and shut-down modes. The device features a low-current mode to maintain efficiency under light-load conditions, and an adaptive on-time control architecture for fast transient response.
    The LMR22007 can deliver up to 750mA of continuous load current with an adjustable input current limit. The device has a wide input voltage range of 2.7V to 20V, and supports VIN transients to 24V. Other features include internal compensation, internal soft start, input under-voltage protection, internal bootstrap diode, and thermal shutdown.

    The SN65HVD01 is a low-power, 250 kbps or 20 Mbps data rate selectable RS-485 transceiver, utilizing a 1.65-V to 3.6-V supply for data and enable signals, and a 3.3 V 10% supply for bus signals. The device is designed for applications requiring synchronous (parallel transceiver) signal timing. On-chip transient suppression protects the device against destructive IEC 61000 ESD and EFT transients.
    TLK111  is a single-port Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. Additionally, the TLK111 supports 100Base-FX signaling via an external optical transceiver. The device supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface
(RMII) for direct connection to a Media Access Controller (MAC). The TLK111 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
    The TPS53513 is a small-sized, synchronous buck converter with an adaptive on-time D-CAP3 control mode  available in a 28-pin QFN package and is specified from 40C to 85C ambient temperature. The device offers ease-of-use and low external-component count for space-conscious power systems.
    The TPS53513EVM evaluation module (EVM) allows users to evaluate the TPS53513. The TPS53513 is a D-CAP3 mode, 8-A synchronous buck converter with integrated MOSFETs. It provides a fixed 1.2-V output at up to 8 A from a 12-V input bus. The TPS53513EVM is designed to demonstrate the TPS53513 in a typical, low-voltage application while providing a number of test points to evaluate the performance of the TPS53513.
    The TPS7A3501 is a positive voltage, low-noise (3.8 VRMS) power filter capable of sourcing a 1-A load suitable for quiet supply solutions. Power filters, such as the TPS7A3501, provide voltage regulation across the input and output terminals with high efficiency (low insertion loss), and power-supply rejection. The device is ideally-suited as a noise filter for 3.3-V, 2.5-V, and 1.8-V supplies at up to 1 A.
    The input-to-output voltage regulation is also user-programmable, from 200 mV to 500 mV, with a single external resistor. If no resistor is used, the TPS7A3501 provides 330 mV of input-to-output voltage regulation. The device is stable with 10-F input and output ceramic capacitors and a 10-nF noise-reduction ceramic capacitor.
    The TPS7A3501 is fully specified over a wide temperature of 40C to +125C. The device is offered in a low thermal resistance, 2-mm ? 2-mm, SON-6 package. Unlike passive filters, the TPS7A3501 provides thermal and current protection for itself and surrounding circuitry.

    The UCC28180 is a flexible and easy-to-use, 8-pin, active Power Factor Correction (PFC) controller that operates under Continuous Conduction Mode (CCM) to achieve high Power Factor, low current distortion and excellent voltage regulation of boost pre-regulators in AC - DC front-ends. The controller is suitable for universal AC input systems operating in 100-W to few-kW range with the switching frequency programmable between 18 kHz to 250 kHz, to conveniently support both power MOSFET and IGBT switches. An integrated 1.5-A and 2-A (SRC-SNK) peak gate drive output, clamped internally at 15.2 V (typical), enables fast turn-on, turn-off and easy management of the external power switch without the need for buffer circuits.
Reinforced Isolation  (AMC1304, ISO7842)

TI's new data converter and digital isolation families enable industry-leading reinforced isolation ratings and precision performance for high-voltage applications.

HDC1080 Low Power, High Accuracy Digital Humidity Sensor with Temperature Sensor

he HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.

450V Linear Controller (TPS92410)

The TPS92410 controller from Texas Instruments integrates a multiplier and tunable phase dimmer detection, as well as analog dimming inputs and drive circuit protection functions to ease design of downlights, fixtures and lamps powered from an offline AC or conventional DC power source. 

INA260 High/Low-Side Digital Current/Power Monitor with Integrated 2m? Shunt Resistor
The INA260 is a digital-output, current, power, and voltage monitor with an I2C and SMBus-compatible interface with an integrated precision shunt resistor. It enables high-accuracy current and power measurements and over-current detection at common-mode voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device is a bidirectional, low- or high-side, current-shunt monitor that measures current flowing through the internal current-sensing resistor. The integration of the precision current-sensing resistor
SIMPLE SWITCHER Synchronous Converters (LM43600/1/2/3 and LM46000/1/2)

The seven SIMPLE SWITCHER regulators from Texas Instruments simplify wide VIN synchronous power supply design and help engineers create energy-efficient, electromagnetic interference (EMI) compliant products. The easy-to-use LM43600/1/2/3 and LM46000/1/2 DC/DC converters feature an input voltage range of up to 60 V for high reliability in rugged systems, and 27 micro amps of standby current that minimizes power consumption at light load.

Industrys smallest 12-, 14- and 16-bit SAR ADCs

System designers can reduce the size of their industrial monitoring and control applications with TI's newest successive approximation register (SAR) analog-to-digital converters (ADCs). The ADS7042 is the industrys smallest and lowest-power 12-bit SAR ADC, and the ADS8354 family includes the industrys smallest 14- and 16-bit, simultaneous-sampling SAR ADCs

Industry's smallest 18-V eFuse power protection switch efficiently defends systems (TPS25940)

These tiny devices reduce solution size and extend battery life in portable and adapter-powered devices, and enterprise and client solid state drives (SSDs).

Ultra-small 4-A buck-boost converter [TPS630250]

The TPS630250 buck-boost converter with 4-A switches supports a wide input voltage range of 2.3 V to 5.5 V and can discharge lithium batteries down to 2.5 V or lower, while maintaining excellent light load efficiency and a quiescent current of 35 uA. The 2.5-MHz device can achieve a complete DC/DC buck-boost solution of 33mm2 -- less than half the size achieved with existing 4-A products.

Fast-charge 5-W wireless power receivers (BQ51020)

Industrys most power-efficient 5-watt wireless power receivers that support the Wireless Power Consortium (WPC) Qi 1.1 standard. TIs new bq51020 and bq51021 allow consumers to charge their Qi-compliant mobile phones, tablets, power banks and other electronics faster, cooler and more efficiently compared to other available wireless power solutions.

Mid-Voltage NexFET MOSFETs for high-current motor control designs

TI introduced 14 power MOSFETs in TO-220 and SON packages that support input voltages from 40 V to 100 V. The high-efficiency NexFETs include 40-V, 60-V, 80-V and 100-V N-channel devices that provide excellent thermal performance to a wide range of high-current motor control and power applications.

Flyback power solutions (UCC28910 and UCC28630)
Two flyback power solutions from Texas Instruments achieve the highest energy efficiency and lowest standby power consumption for 5- to 100-watt AC/DC power supplies. The UCC28910 700-V flyback switcher and UCC28630 high-power, Green-Mode controller expand TIs leading portfolio of flyback controllers covering the complete power range of AC/DC adapters and power supplies used in personal electronics, printers, white goods and smart meters.

Power over Ethernet - SIMPLIFIED

Texas Instruments Incorporated (TI) (NASDAQ:TXN) introduced a two-layer PoE power sourcing equipment (PSE) evaluation module and TI Design based on TI's new TPS23861 PoE controller. The high-performance quad-port controller and reference design significantly reduce development time and cost when creating PoE-enabled network video recorders, IP phone switches and wireless base stations.

Start your design with the industry's first single-chip microcontroller (MCU) with built-in Wi-Fi connectivity! Created for the Internet of Things (IoT), the SimpleLink CC3200 Internet-on-a-chip solution is a wireless MCU that integrates a high-performance ARMCortex-M4 MCU allowing customers to develop an entire application with a single IC. With on-chip Wi-Fi, Internet and robust security protocols, no prior Wi-Fi experience is needed for faster development.
Connect any low-cost, low-power microcontroller (MCU) to the Internet of Things (IoT) with TI Internet-on-a-chip solutions! The CC3100 wireless network processor is part of the new SimpleLink Wi-Fi family that dramatically simplifies the implementation of Internet connectivity. This product integrates all protocols for Wi-Fi and Internet which greatly minimizes host MCU software requirements. With built-in security protocols, the CC3100 solution provides a robust and simple security experience. Additionally, the CC3100 is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs and the TI E2E Community for support. The device is available in an easy-to-layout QFN package.
TI's SimpleLink Wi-Fi Family

Connect More: Anywhere. Anything. Anyone.

Program applications on the industrys first Internet-on-a-chip solution with user-dedicated MCU
Power Wi-Fi battery-operated designs for more than a year on two AA batteries
Get started quickly, no Wi-Fi experience needed

The DRV5033 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.

The DRV5033 responds the same to both polarities of magnetic field direction.

HDC1010 Low Power, High Accuracy Digital Humidity Sensor with Temperature Sensor
  The HDC1010 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1010 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1010 is placed on the bottom part of the device, which makes the HDC1010 more robust against dirt, dust, and other environmental contaminants. The humidity and temperature sensors are factory calibrated and the calibration data is stored in the on-chip non-volatile memory.